|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3-4Amp * 120/240 Vac (AC OUTPUT) * 60 Vdc (DC OUTPUT) * SIP * High Packaging Density * Compatible w ith 5, 15 & 24 Volt Logic Systems * Opto-Isolated 4000 Vrms * Zero Voltage Sw itching (AC) Available in 3Arms and 4Arms ratings, all are SPST-NO PC-mount relays that provide greater packaging density and compatibility with pin out of Series 6 and OAC output modules. Internal snubber included for high dv/dt applications (AC). Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. Series MP MODEL NUMBER MP120D3 MP2 40D3 MP2 40D4 AC OUTPUT SPECIFICATIONS Operating Voltage Range (47-63 Hz) [Vrms] Load Current Range [Arms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Maximum I2 t for Fusing, (8.3 msec.) [A2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/sec] Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load 12-140 .02-3 400 90 1.6 36 5.0 200 1/2 Cycle 1/2 Cycle 0.5 24-280 .02-3 600 90 1.6 36 5.0 200 1/2 Cycle 1/2 Cycle 0.5 MPD CD3 24-280 .02-4 600 130 1.6 72 5.0 200 1/2 Cycle 1/2 Cycle 0.5 DC OUTPUT SPECIFICATIONS Operating Voltage Range [Vdc] Load Current Range [Adc] Max. Over Current (non-repetative) 1sec [A] Max. On-State Voltage Drop @ Rated Current [Vdc] Max. Turn-On time (Tdelay + Trise ) [s] Max. Turn-Off time (Tdelay + Tfall ) [s] Max. Off-State Leakage Current @ Rated Voltage [mA] 3-60 0.02-3.0 5.0 1.5 100 100 1.0 All M odels INPUT SPECIFICATIONS Control Voltage Range [Vdc] Must Turn-On Voltage [Vdc] Must Turn-Off Voltage [Vdc] Typical Input Current @ 5Vdc [mA] Nominal Input Impedance [Ohms] 3-32 3.0 1.0 2.6 1500 (c)2003 CRYDOM CORP, Specifications subject to change without notice. GENERAL NOTES RS-343, paragraph 13.11.1 All parameters at 25C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard Inductive loads should be diode suppressed. FastFax Document No. 111 SERIES MP Rev. 111303 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 www..com - Free DataSheet Site. 3-4Amp * 120/240 Vac (AC OUTPUT) * 60 Vdc (DC OUTPUT) * SIP GENERAL SPECIFICATIONS Series MP 4000 Vrms 109 Ohm 8 pF -40 to 80C -40 to 125C 0.7 oz. (20g) Dielectric Strength 50/60Hz Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range M ECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation: Thermally Conductive Epoxy BOTTOM VIEW CURRENT DERATING CURVES 4.0 1u draft top to base 3.0 LOAD CURRENT (AMPS) 1.00 (25.4) LOAD CONTROL 2 3 4 .20 (5.1) .025 (.64) 2.0 MP240D4 MP120D3 MP240D3 MPDCD3 .25 TYP. (6.35) 1 1.0 .040 (1.0) DIA. (4 PLACES) 0 20 40 60 80 AMBIENT TEMPERATURE (uC) 1.10 (27.9) .70 (17.8) 1.70 (43.1) .16 (4.1) .30 (7.6) .40 (10.2) AC Output PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL DC Output PIN 1: +DC LOAD PIN 2: -DC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL All dimensions are in inches (millimeters) (c)2003 CRYDOM CORP, Specifications subject to change without notice. APPROVALS UL E116950 VDE 5900 UG (AC Output Only) CSA LR81689 (AC Output Only) FastFax Document No. 111 SERIES MP Rev. 111303 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 |
Price & Availability of MP240D4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |